Hitro lepilo za papirne škatle

Samodejni lepilnik map s 4/6Corner

Model: LG800C (razen sistema lepil v razpršilu)

Avtomatski stroj za zlaganje kartonov (LG800) je zelo stabilen-stroj velike količine, ki lahko strankam prinese več dobička.

Ima funkcijo 4/6 kota. Vsak sklop krmili neodvisen motor. Uporablja ESC, PLC, uvožene elektronske komponente in tri-opremo za sledenje ploščam.

Glavne značilnosti

1) Celoten stroj ima strukturo lasersko-rezanih jeklenih plošč.

2) Sistem za brizganje lepila- (tri pištole in trije senzorji) neobvezno.

3) Notranji kurirji v stroju se nastavljajo z motorji.

4) Plazemski sistem opcijsko.

5) Podatke obdelave škatel je mogoče shraniti v računalniški nadzorni sistem (opcijsko).

6) Indikator položaja (izbirno)

7) Spremenljiva nastavitev.

8) Dolgo-pred-zgibni odsek, 180-stopinjski prepogib za prvo vrstico, 135-stopinjski zložljiv za tretjo vrstico, zlahka se odprejo po pred-zlaganju.

Specifikacija:

Velikost papirja

◆ straight line box WL: max 800800 mm min 9060 mm

◆ lock bottom box WL: max 700800 mm min 15060 mm

Krmier

◆ MIKI-pulley infinite speed variator 1/set.

◆ Independent adjust feeding belt, ensure the smoothly paper feeding.1set/6pcs,size: 1026308mm

◆ Independent motor, inverter adjust speed, effectively ensure the balance of paper spacing.

◆ Paper carry rod with high performance Taiwan-made vibrating motor.

◆ Air feeding device.(optional)

Poravnavaenoto

◆ Aligning the askew paper wihch from feeder, make sure the paper running in straight line.

◆ Alignment unit can be adjusted up and down, suitbale for different thickness paper stably.

◆ correct the paper, avoiding the paper going to two sides.

Dva jermena: 2145344mm

Pred{0}}zložljiva enota

◆ 2 plate conveyor belt structure, segmenting left and right upper belt plate can be adjusted according to product demand, fast and efficient.

◆ three long top courier in this section, 180 degree folding could be preformed

Nitta pasovi: 1 komplet

specifikacije: 1985243mm-2kos 3375243mm-2kos

5000444mm-1kos 5000244mm-1kos 4755304mm-1kos

Enota za zaklepanje{0}}

◆ 3 plate conveyor belt board structure, segmental upper belt board function is the same as the prefolding part, eliminate the problems in the production of special-shaped box products effectively.

◆ The upper and middle belt board is detachable, depending on product requirements for disassembly and debugging.

◆ Nitta belts 1set /9 pcs

Specifikacija:

1985243mm-2kos 3375243mm-1kos

1780243mm-2kos 3450244mm-3kos

3610304mm-1kos

◆ Safety door (Optional)

Enota za lepljenje

◆ The mechanical lower pasting cylinder is designed with separate type of rubber wheel and rubber cylinder, high speed, easy to clean and maintain.

◆ Crashlock, 4/6 corner box ,etc need to equip eletrical spray guns. (recommend 3 or more guns)

◆ width of gluing wheel 4MM (standard), other width could be customized

Zložljiva enota

◆ 2 plate conveyor belt board structur.

◆ The left and right outside folding belt speed can be adjusted independently to ensure the molding accuracy.

◆ Wide box type can be matched with middle upper and lower belt plate to ensure stable transportation.

◆ Nitta belts 1set /8pcs

Specifikacija:

2785243mm-1kos 4565243mm-1kos

3175243mm-1kos 7320344mm-3kos

7520354mm-2kos

Stiskanjeenoto

◆ Independend inverter adjust speed, proportional linkage to main engine under automatic model, adjusting separately with the same speed as the main engine under manual.

◆ Upper and lower belt telescopic adjustment is simple and easy to operate.

◆ Equipped with high speed electronic kick counter.

Prevozna enota

◆ In automatic mode, the paper box spacing is set. The pressure belt speed is connected with the belt speed of the main engine in proportion. When photoelectric monitoring the paper box, the leather moves.

◆ In manual mode, the pressure belt is delivered at a constant speed, which is not affected by the machine speed.

◆ The pressure part adopts the pressure type pressing, the pressure control is more accurate, the product bonding effect is more guaranteed.

4/6 kotna funkcija (izbirno)

◆ All types and most sizes of 4/6 corner boxes can be quickly set up.

◆ the inclined frame according to the page size of the paper box adjustable.

◆ 45 degrees guide plate, suitable for all the size of the paper box.

◆ modular folding hook running track, high speed and high quality production.

Električni in pogonski sistemi

◆ Schneider brand inverter is used to realize synchronous speed regulation of the main engine, making the speed change, adjustment, stability and reliability.

◆ Humanized design of hd touch screen, fully consider the operator's convenience.

◆ Schneider brand PLC is adopted, and a number of safety protection devices are added, making the operation of the machine more safe and reliable.

◆ Control panel, layout more reasonable, icon prompt, simple and easy to understand with remote control switch, make the operation more convenient.

Seznam glavnih delov

1.Električni del

2.Pas

3.Pnevmatski element

VZORCI ŠKALE

Priljubljena oznake: Hitro lepilo za papirne škatle, Kitajska, dobavitelji, proizvajalci, tovarna, po meri, cena, na zalogi